Raspberry Pi - MegaPi Hat

From Protoneer - Wiki
Jump to: navigation, search

Overview

MegaPi-MCU.JPG

Specifications

Digital I/O Pins 54 (of which 15 provide PWM output)

Analog Input Pins 16

Operating Voltage 3.3V and 5V tolerant

Flash Memory 256 KB

EEPROM 4 KB Clock Speed 16 MHz Programmable via Arduino IDE (avrdude-rpi)


4x Hardware UART's. (Serial Pins RX/TX) I2C , SPI , ISP All Pins are 5V tolerant.

Gallery

Ramps v1.4 Shield

This shield is used in lots of 3D printers and CNC machines

Availability, Update Notifications and Forums

Available online:

Protoneer Shop

Newsletter and Forum

Protoneer News-Letter
Raspberry Pi MegaPi Hat forum section

Software

Arduino IDE

The easiest way to program a Raspberry Pi MegaPi Hat is with the Arduino IDE. To do this the programming software(avrdude) that is packaged with the Arduino IDE needs to be upgraded to allow the Raspberry Pi General purpose IO pins to program the hat.


Please follow the following steps to Install the latest Arduino IDE on the Raspberry Pi and upgrading it to work with the Hat.

Hardware

Version 1.00

  • Initial release. Arduino Mega2560 compatable Raspberry Pi Hat.