NANO-ARM

From Protoneer - Wiki
Revision as of 14:34, 26 July 2017 by F5dta (Talk | contribs)

Jump to: navigation, search

Overview

NANO-ARM-Bottom1.jpg

We loved Arduino Nano's but always wanted a bit more performance and memory.

So we decided to create a Arduino Nano compatible board but with an upgrade micro-controller that is similar to an Arduino Zero.

The NANO-ARM has the following features:

  • Runs at 48MHz (Atmel SAMD21)
  • 256KB FLASH Memory
  • 32KB RAM
  • Pin compatible with Arduino Nano but runs at 3.3V
  • SAMD21 micro-controller same as used on a Arduino Zero's.
  • Built in USB
  • Arduino Zero bootloader pre-loaded.
  • 20 I/O pins with 5 extra pins that can be used for I2C/SPI or I/O
  • 6 Analog Pins(ADC) with 12-bit resolution (4096 resolution point vs Arduino Uno's 1024)
  • 1 Digital to Analog(DAC) pin with 10-bit resolution.
  • Designed and Manufacture in New Zealand

Availability, Update Notifications and Forums

Available online:

Protoneer Shop


Newsletter and Forum

NANO-ARM Arduino Zero Compatible board forum section

Arduino IDE

Programming a NANO-ARM

Pin Mappings

Pin mappings for Arduino Zero / NANO-ARM to Arduino Pins are available from the following file in Windows: C:\Users\<USERNAME>\AppData\Local\Arduino15\packages\arduino\hardware\samd\1.6.12\variants\arduino_zero\variant.cpp

Hardware

Version 1.01

Initial release.